HEAVY CUT COMPOUNDS There are 14 products.

Sonax Abrasive Paste

3D AAT501 Cutting Compound

This compound is designed for body shop use.  It is a fast cutting compound and designed to save you time and money. It cuts quickly without using petroleum products and without generating...

Ewocar Heavy Cut - Compound

Ewocar Heavy Cut is water-based with low dust technology inside which allows for a longer buffing cycles without drying out on you prematurely like other compounds. After polishing cycle simply...

ZviZZer PC 5000 PRE CUT

PROCEDURE We recommend the blue polishing pad for this procedure. Apply a sufficient quantity of PC5000 to the paint defect, surface or polishing pad. If you are using a low speed (1,000 rpm)...

ZviZZer HC 4000 HEAVY CUT

USAGE: For processing we recommend the red polishing sponge or lambskin. Apply sufficient amount of HC 4000 to the paint defect / surface or polishing sponge. Distribute evenly over the defect at a...

KOCH-CHEMIE Coarse Polishing Compound H9.01

3D ACA500 X-TRA Cut Compound

3D ACA™ 500X-TRA CUT COMPOUND™ is infused with ALPHA CERAMIC ALUMINA™. AlphaCeramic Alumina™ is a revolutionary new abrasive which has beenconstructed to provide lower heat, high speed leveling...

CAR PRO ClearCUT Compound

CAR PRO Ultracut

UltraCut contains a cocktail of fully diminishing abrasives, which correct heavy defects, while producing minimal hazing. Combine it with the CARPRO cutting pads (wool, flash, cool) or microfibres...

Rupes Cut Polishing Compound D-A COARSE

3D ACA 510 Rubbing Compound

ACA 510 rubbing compound formula is designed to work with Wool or Foam pads. This premium rubbing compound works well with dual action polisher. However for faster performance a rotary polisher is...

Soft99 Cutting Compound

1. Apply an appropriate amount of paste to a pad or polishing sponge. 2. Work on small panels by adjusting machine speed 3. Keep an eye on the paint temperature to avoid overheating 4. Verify the...