Liquid Elements A1000 V4 Mini Polishing Machine

Due to the battery supply and the compact design, the A1000 V4 from Liquid Elements can also be ideally transported in the trunk and used for spontaneous use in between. With the second battery, which is also included in the scope of delivery, it is possible to work almost continuously. A special battery status light lights up red as soon as the machine is running low on battery power and signals a low battery level. Ideal for the entire outdoor area, piano finish, rims and all other imaginable painted areas on the vehicle. We absolutely love the A1000 V4 and we’re sure you’ll love it too.

Liquid Elements A1000 V4 highlights:

• 4 different attachments
• 3mm eccentric mechanism
• 8mm eccentric mechanism
• rotation
• Cleaning brush for polishing pads
• Very handy, ergonomic design
• 90 watts of power
• Lithium ion technology
• LED battery level indicator
• 5 speed levels
• Manufactured under strict controls
• Suitable for private and professional use
• Special electronics for constant torques and speeds
• Unrivaled value for money in its class
• Extra for hard-to-reach places and small areas

Liquid Elements A1000 V4 Specifications:

• Model: A1000 V4
• Orbit mechanics: 3mm eccentric / 8mm eccentric / rotation
• Power consumption: 90W
• Rotational speed (per minute): 2500-6000 r/min
• Security class: Class II
• Operating voltage: 12V / 50Hz
• Disc diameter (standard): 38mm (ideal for 40mm polishing pads)
• Battery life = approx. 45 minutes (depending on attachment)
• Charging time to 100% = approx. 60 minutes

Liquid Elements A1000 V4 Application:

1. Clean the vehicle surface with a thorough hand wash

2. Knead the paint surface with cleaning clay and lubricant

3. Tape off parts that are not polished (rubber, plastic)

4. Place the 40 mm polishing pad in the middle of the Velcro surface of the polishing machine’s backing pad

5. Place a maximum of 1 peanut sized drop of polish on the pad

6. Carefully spread the polish over a 30cm x 30cm area (without turning on the machine)

7. Cross-buff on setting 4-5 until desired result is achieved

8. Remove Polish residues with a microfiber cloth (without pressure!)

9. Grab the pad by the Velcro surface and pull it off

Liquid Elements A1000 V4 scope of delivery:

1x A1000 battery polishing machine

1x 3mm eccentric mechanism

1x 8mm eccentric mechanism

1x rotation mechanism

1x brush attachment

1x support plate 38mm for 40mm pads

2x 12v battery

1x battery charging station

1x Allen key

2x open-end wrench

1x operating instructions

1x practical carrying bag with foam insert