Bilt Hamber Auto Clay Medium

€18.95
Tax included
Real Time: 10 Visitor right now
  • Designed to effortlessly restore the factory smooth finish to paint finishes.
  • They have received critical acclaim in the detailing industry for being the most durable, cost effective and well-designed clay-bars available today.
  • Using Bilt-Hamber Clay-Bars - regular, medium or soft - you will effortlessly remove particles, leaving the paint glass-smooth.
  • Not only does the paint feel and look a lot better once clayed, but the removal of these objects sticking to the surface allows the next stages of paint care to progress far more smoothly.
  • By removing these particles before the clay-bar is used, the bar will last longer and concentrate its action on the remaining contamination.
0
Last items in stock

How to use:

  • Before using auto-clay thoroughly wash your car to remove any loose dirt. Direct sunlight should not fall on your car’s surface, and it’s best if the work area is relatively cool, but not cold.

  • To use auto-clay spray water with a plant mister on a small area of your car and rub the bar back and forth with light pressure. auto-clay should glide across your paint, keep the paint surface wetted thoroughly. auto-clay must not be used dry. Listen carefully - at first you will hear the bar as it pulls the particles away from the paint, the noise and friction will disappear quickly.

  • After a few passes with auto-clay, rub your fingers over the area to feel if the surface contamination was removed. Keep rubbing until all contamination is gone. Finally, wipe the clay residue off with a soft terrycloth towel. Just like waxing, work in small areas.

  • What you should see coming off of the car and depositing itself on the clay bar is a reddish brown residue, this is what you want to see. As the clay bar becomes soiled, simply fold it over squash it out and keep going. Under no circumstances should the clay bar be used if dropped on the ground, inside or out! The clay bar is good for about 4 or 5 cleans on the average sized car. Once the paint is clean, wax your car immediately.

Quick Guide:

  • Run your fingers over your freshly washed and dried paintwork. Feel for a rough, gritty texture? This is caused by embedded particles. Bonnets are often the most contaminated
  • If you can feel these particles atomize a fine mist of clean tap water over a 2-3 square feet area, using a plant mister or suitable spray
  • Glide the auto-clay over the wet surface, properly lubricated clay will move effortlessly just like an ice hockey puck on ice
  • You may well hear the contamination at first, this will quickly reduce as you move the bar back-and-forth. Keep the bar moving until the noise has gone
  • Check again with your fingertips to check that all the contamination was removed
  • Once your car’s paint is glass smooth - and it really will be - use auto-balm, cleanser-polish, finis-wax, hydra-wax or micro-fine to seal the pores and provide a deep gloss shine

Capacity: 200g

BH-M
4 Items

Specific References

Bilt Hamber Auto Clay Medium

€18.95
Comments (0)