New products
In sensor mode, the light can easily be switched on/off by waving your hand in front of the lamp - even if you are wearing gloves. The I-MATCH 3 headlamp is provided with the very newest...
When it comes to liquids, pastes, and dry residues, (like wax reside or compound residue) there are basically two categories, water-soluble and water-insoluble. A spray detailer for the most part...
Best sellers
Weight: 400 GSM Material: 100% microfiber (80% polyester, 20% polyamide) Size: 40 x 40 cm Comes in two colours: Orange and blue Edge: Laser cut 2 pcs per pack
The new ZviZZer POLISHING PADS were developed for the specific application in combination with the ZviZZer POLISHING SYSTEM to achieve optimum results. Our production „MADE IN GERMANY“ guarantees...
Ewocar Heavy Cut is water-based with low dust technology inside which allows for a longer buffing cycles without drying out on you prematurely like other compounds. After polishing cycle simply...
The new All-Rounder pads are made for use with both rotary and dual action polishing machines. It consists of two separate layers of which the outer work surface is already known high quality very...
On sale
RUPES HR81M BigFoot Nano iBrid (Long-Neck) - BLX Kit1 x RUPES HR81M BigFoot Nano iBrid (Long-Neck) 2 x RUPES BigFoot Nano iBrid Li-ION Batteries 1 x RUPES BigFoot Nano iBrid Mains Power Cable 1 x...
RUPES HR81M BigFoot Nano iBrid (Short-Neck) - BLX Kit1 x RUPES HR81M BigFoot Nano iBrid (Short-Neck) 2 x RUPES BigFoot Nano iBrid Li-ION Batteries 1 x RUPES BigFoot Nano iBrid Mains Power Cable 1 x...
Ø backing pad mm-in 150 – 6″ Ø orbit mm-in 21-13/16” Power Watt 500 R.P.M. 3000 – 4500 Weight kg-lbs 2,7 – 5,95 Speed control √ Backing pad thread M8-F Electrical Cord m-ft 9...
The MarkIII incorporates many of the new features, first shown on the LK900E Mille, and interesting design updates, that make one of the industries best polishing system even better. The highly...
Instructions: 1. Apply the product to the dirty surface with a sprayer. 2. Wipe dry with a microfibre cloth.
Usage:1. Spray contaminated surface2. Wait 30-45 seconds3. Wash down the surface with highly pressured water4. Repeat the process if needed
Product usage:1. Wash down sand and other impurities from car body2. Dilute 50-100 ml of the product with 10 l of water3. Wash the surface with clean sponge. Preferably from top to bottom4. Rinse...
Product usage1. Apply the product on dirty parts of the wheel2. Wait 30-60 seconds until the product starts working3. Wash everything down with highly pressured water
Usage: 1. Spray product on polluted surface2. Wait 30-60 seconds until the product starts working3. Use brush in case of strongly contaminated elements4. Wash everything down with highly pressured...
Methods of use Spray product on a cloth or brush to avoid spraying it outside of cleaning area. Apply it on contaminated spot. Wait a moment for the product to take effect. Wipe contaminated spot...
USAGE: 1. Before using, thoroughly vacuum vehicle’s interior2. Apply product on the cloth or sponge to avoid spilling it or apply it directly on the surface3. Scrub the surface with a sponge or...
USAGE: 1. Before using, thoroughly vacuum vehicle interior2. Apply the product on the microfibre cloth or sponge and precisely rub it into leather surfaces3. Wipe it until everything is dry
USAGE: 1. Apply product on contaminated surface and wait for 30-60 seconds2. Scrub contaminated spot if needed3. Wipe the surface with a wet cloth
How to apply the product: Make sure the rim or paint is cool. Spray directly onto the cleaned surface. Spread using soft brush if necessary. Wait 3-5 minutes observing growing intensity of...
